Description
SUN MODE (Daylight Lighting Settings)
First Button – DAY-L timer
• Timer: 6H，10H，12H
• Brightness: Default (cannot be set)
• Color:Default (Orange light from dark to bright – Full spectrum white light – Orange light from bright to dark)
6H Daylight Lighting Graph
This mode light will simulate the sunrise – day light – sunset.
After choosing the time, the fish thank light will run as shown by the coordinates in the picture.
10H Daylight Lighting Graph
There are a total of 3 time options, that is to say, there are 3 kinds of lighting curves.
This Day-L mode can be set up and used alone, or it can be set up and run in conjunction with the Moon-L mode.
DIY CYCLE
In the next day, this mode light will start running at the same local time when the DAY-L timer button was pressed on the first day. And in each subsequent day, the light will start running at the time set on the first day.
MOON MODE (Nightlight lighting settings)
Graph of Moon Lighting
1. Press the second button for more than 3 seconds, the indicators of the 3H, 5H and 12H will be on at the same time, and then press third button to choose the color of the moonlight lighting. You can choose from 7 colors.
2. Press fourth button to choose the brightness of the moonlight lighting.
3. Pressthe second button to finish moonlight lighting set.
4. Press the second button again to choose the moonlight lighting time, the indicator of 3H/5H12H starting flashing means the light is working.
Second Button – MOON-L timer
• The second button can select the time of moonlight mode(3H, 5H, 12H);
• It is also the confirmation key for the moonlight mode setting;
Third Button – On/Off/Color
1. The third button turns the light on and off.
2. Also can choose the color:
• There are 7 color options in moonlight mode (red, orange, yellow, green, cyan, blue and purple);
• There are 9 color choices in manual setting mode (red, orange, yellow, green, cyan, blue, purple, gradient cycle and full spectrum);
• Day light color can not be selected to set
Fourth Button – Brightness
Press fourth button to adjust the brightness of the light. (10% – 25% – 35% – 50% – 75% – 100% – 75% – 50% – 35% – 25% – 10%).
High-quality Lights Beads
• 5 rows of lamp beads, LED number: 68pcs, the light surface is wider, the color is bright. High lumens, translucent fish tanks, and brighter plants.
• Long-term use does not decay, the light effect is pure and transparent, the life is long, and it can be used for tens of thousands of hours.
Waterproof
• The light beads are made of glue filling, fully sealed and waterproof. The light is high light transmittance, waterproof, and easy to clean.
• Note: When in use, some lights will enter water vapor due to the different scenes used in fish tanks, etc. This will not affect the use, and there is no need to worry about the lights entering the water. The lamp beads have waterproof protection.
Clip On Aquarium LED Light
• Clip On Aquarium LED Light suitable for fish tank walls less than 0.74in thick.
• Can adjust the distance between the light and the fish tank wall with the extendable rod(3.1inchs).
UL certification power
• DC 20V, safe and secure.UL certification, safety is guaranteed.
• The separable adapter, even if it is damaged, no need to replace the light to avoid waste.
